Showing all 53 results

• 

  300amp Magnetic Welding Ground Clamp

  These magnetic ground clamps are designed to hold a ground cable to any ferromagnetic surface. Using patented technology, this device has strong holding power as well as a great amount of shear force holding strength to reduce sideways movement. Applicable to clamp both flat and round workpieces. Simple operation with On/Off controlled by the switch....$62.50
  300amp Magnetic Welding Ground Clamp quantity
  Add to cart
• 

  5 Channel Electrical Cable Ramp

  Protects plasma control cables from wear and tear associated with foot and forklift traffic Industrial all-weather heavy duty rubber ramps with PVC cable cover designed to resist oil and abrasions. Textured surface. Interlocking connectors. Full top and bottom protection. Hinged lids Useful for other cables or hoses around the shop. Optional end caps available for...$55.00
  5 Channel Electrical Cable Ramp quantity
  Add to cart
• 

  Anodized Large Replacement Lifter 12″

  Replacement Anodized lifter for Fab-Cut systems tables with 12 inches of travel. Each lifter comes with one micro limit switch to enable secondary OHMNIC touch off as well as a new collet to attach the motor shaft to lifter. Please Feel Free Contact Us For More Info or If You Require A Specific Lifter Replacement...$795.00
  Anodized Large Replacement Lifter 12" quantity
  Add to cart
• 

  Anodized Small Replacement Lifter 7″

  Replacement Anodized lifter for Fab-Cut systems tables with 7 inches of travel. Each lifter comes with one micro limit switch to enable secondary OHMNIC touch off as well as a new collet to attach the motor shaft to lifter. Please Feel Free Contact Us For More Info or If You Require A Specific Lifter Replacement...$695.00
  Anodized Small Replacement Lifter 7" quantity
  Add to cart
• 

  Atlas Copco 5 HP Air Compressor (CR5-CRS1-575/3-80V-PS)

  Atlas Copco 5 HP two-stage splash lubricated piston air compressor mounted on 80 gallon vertical air vessel. Key Features • Cast iron design to ensure durability and reliability for all demanding applications • Fully enclosed belt guard for additional equipment safety • ASME safety valves • Start/Stop pressure switch control • Magnetic starter included •...$5,625.00
  Atlas Copco 5 HP Air Compressor (CR5-CRS1-575/3-80V-PS) quantity
  Add to cart
• 

  Atlas Copco 7.5 HP Air Compressor (CR7.5-CRS1-575/3-80V-PS)

  Atlas Copco 7.5 HP two-stage splash lubricated piston air compressor mounted on 80 gallon vertical air vessel. Key Features • Cast iron design to ensure durability and reliability for all demanding applications • Fully enclosed belt guard for additional equipment safety • ASME safety valves • Start/Stop pressure switch control • Magnetic starter included •...$6,075.00
  Atlas Copco 7.5 HP Air Compressor (CR7.5-CRS1-575/3-80V-PS) quantity
  Add to cart
• 

  BES00C9 Proxy Sensor

  Quantity: 1 Per Pack Inductive Sensor NPN N. O. (Normally Open) M8x1 Stainless Steel 200mA 10-30VDC Shielded 2mm Sensing Range$47.89
  BES00C9 Proxy Sensor quantity
  Add to cart
• 

  FerionCool 50

  FerionCool 50 is a next-generation industrial fluid technology engineered for modern cutting operations. Designed to protect equipment, stabilize water systems, and improve operating conditions across demanding fabrication environments. Ready-to-use formulation, optimized for thermal and plasma cutting. Combines operational protection, system cleanliness, and simplified fluid management into one solution.$310.00
  FerionCool 50 quantity
  Add to cart
• 

  Helical Spur Gear 14mm

  Quantity: 1 Per Pack CTS 2020 14mm Spur Gear For Flashcut 4:1 Gear boxes.$79.00
  Helical Spur Gear 14mm quantity
  Add to cart
• 

  Helical Spur Gear 20mm

  Quantity: 1 Per Pack Bore Diameter:20mm Teeth Count:25 Keyway: 6mmx3mm$109.97
  Helical Spur Gear 20mm quantity
  Add to cart
• 

  Helical Spur Gear 22mm

  Quantity: 1 Per Pack Bore Diameter:22mm Teeth Count:25 Keyway: 6mmx3mm$140.00
  Helical Spur Gear 22mm quantity
  Add to cart
• 

  HIWIN Grease 70g Tube

  The 70g Tube of HIWIN’s G01 Grease is specifically engineered for heavy load applications, providing exceptional lubrication for HIWIN linear guideways and bearings. Formulated to handle extreme pressures and heavy loads, HIWIN G01 Grease minimizes friction and wear, ensuring the durability and longevity of your machinery. This high-performance grease is designed to maintain its stability...$23.09
  HIWIN Grease 70g Tube quantity
  Add to cart
• 

  HIWIN Grease Gun And Nozzle (GG-03)

  The HIWIN GN-80M Grease Gun is specifically designed for use with HIWIN’s 70g grease tubes, making it an indispensable tool for maintaining your HIWIN linear guideways and bearings. This high-quality grease gun ensures precise and efficient lubrication, minimizing friction and wear while extending the lifespan of your equipment. With its ergonomic design and sturdy construction,...$79.00
  HIWIN Grease Gun And Nozzle (GG-03) quantity
  Add to cart
• 

  HIWIN Grease Gun Nozzle Kit (GNZ-NZL-KIT)

  The HIWIN Grease Gun Nozzle Kit (Part #: GNZ-05-BOX) is an essential tool for maintaining optimal performance and longevity of your HIWIN linear guideways and bearings. Designed for precision lubrication, this nozzle kit ensures that grease is applied accurately and efficiently, reducing wear and extending the life of your equipment. The kit includes multiple nozzle...$24.59
  HIWIN Grease Gun Nozzle Kit (GNZ-NZL-KIT) quantity
  Add to cart
• 

  HIWIN HGH-20-CA-Z0-C+KK Bearing Block

  Quantity: 1 Per Pack Series: CG Series Block Type: H (Square Type) Model Size: 20 mm Load Type: C (Heavy Load) Block Mounting Type: A (Mounting from Top) Preload Code: Z0 (Light Preload) Precision Code: C (Normal) The CGH-20-CA-Z0-C in Brief The HIWIN part number CGH-20-CA-Z0-C is a CG Series Linear Guide Block. The CGH-20-CA-Z0-C...$164.80
  HIWIN HGH-20-CA-Z0-C+KK Bearing Block quantity
  Add to cart
• 

  Hypertherm Assy Plasma Interface (228256)

  Quantity 1 Per Pack Hypertherm Assy, Phc Plasma Interface$635.12
  Hypertherm Assy Plasma Interface (228256) quantity
  Add to cart
• 

  Hypertherm Duramax Main Body Replacement (428147)

  Hypertherm 428147 Kit: Duramax Hyamp 180° machine torch main body$768.40
  Hypertherm Duramax Main Body Replacement (428147) quantity
  Add to cart
• 

  Hypertherm Duramax Torch Cap Sensor Switch (228720)

  Quantity: 1 Per Pack Hypertherm 228720 Kit: Cap-sensor switch replacement$38.08
  Hypertherm Duramax Torch Cap Sensor Switch (228720) quantity
  Add to cart
• 

  Hypertherm Kit: Duramax 180° torch adapter ring coupler (228736)

  Genuine Hypertherm 228736 adapter ring. For Powermax65/85 and M65/M65M/M85/M85M hand torch.$38.08
  Hypertherm Kit: Duramax 180° torch adapter ring coupler (228736) quantity
  Add to cart
• 

  Hypertherm Mounting Sleeve Kit Duramax Hyamp 125A (428145)

  428145  Hypertherm Duramax Hyamp Mounting Sleeve used on the Hypertherm Powermax 125 for mechanised cutting applications. This is a genuine Hypertherm replacement part and within the kit are replacement screws to fit the mounting sleeve to the main torch body 428147  $112.88
  Hypertherm Mounting Sleeve Kit Duramax Hyamp 125A (428145) quantity
  Add to cart
• 

  Hypertherm Mounting Sleeve Replacement Kit (128643)

  Hypertherm Kit: For T60M/T80M/T100M/Rt80M Mounting Sleeve Replacement$238.56
  Hypertherm Mounting Sleeve Replacement Kit (128643) quantity
  Add to cart
• 

  Hypertherm Pmax 65/85 CPC Port Upgrade Kit (228697)

  Quantity: 1 Per Pack Automated communication kits Upgrade kits for the Powermax65®/85 and Powermax65/85/105 SYNC™ systems for automated applications. Item Description 228697 CPC port with selectable voltage divider board, Powermax65/85 and Powermax65/85 SYNC 528045 CPC port with selectable voltage divider board, Powermax105 SYNC 228539 Upgrade kit: Serial interface port (RS-485)$262.48
  Hypertherm Pmax 65/85 CPC Port Upgrade Kit (228697) quantity
  Add to cart
• 

  Hypertherm PMX 65 Cutting Consumable Starter Kit (851467)

  Hypertherm Powermax 65 Essential Mechanized Ohmic Cutting Consumable Kit Contents QTY 220817 Mechanized Cutting Shield 65-85 A 2 220955 Deflector 1 220819 Mechanized Cutting Nozzle 65 A 7 220777 CopperPlus Electrode 3 220842 Electrode 4 220953 Ohmic Retaining  Cap 1 220857 Swirl Ring 1 027055 Lubricant 1 058519 O-rings 5$481.40
  Hypertherm PMX 65 Cutting Consumable Starter Kit (851467) quantity
  Add to cart
• 

  Hypertherm PMX1650 Etr Connector (128772)

  Hypertherm 128772 Kit, PMX1650 Etr Conn Rpr  $55.46
  Hypertherm PMX1650 Etr Connector (128772) quantity
  Add to cart
• 

  Hypertherm PMX45 Xp Filter Bowl Guard (428673)

  Hypertherm PMX45 XP Filter Bowl Guard (428673)$138.72
  Hypertherm PMX45 Xp Filter Bowl Guard (428673) quantity
  Add to cart
• 

  Hypertherm Pmx65/85 Air Filter Element (228695)

  Quantity: 1 Per Pack Hypertherm Kit: Pmx65/85 Air Filter Element$77.52Read more
• 

  Hypertherm Positioning Sleeve Kit (228737)

  Quantity: 1 Per Pack Hypertherm 228737 Kit: Duramax 180° positioning sleeve$101.32
  Hypertherm Positioning Sleeve Kit (228737) quantity
  Add to cart
• 

  Hypertherm Power Board Replacement Kit (228662)

  POWERMAX 85 ELECTRONIC POWER CIRCUIT 228662 HYPERTHERM Processes and controls the flow of electrical powerCompatible with Powermax 85Code: 228662Original Hypertherm product With 50 years of experience and nearly 500 international patents, Hypertherm invests more resources into industrial cutting research, development, and testing than any other manufacturer in the world$1,917.60Read more
• 

  Hypertherm Powermax 105/125 Upgrade CPC Port (228884) 

  Hypertherm Powermax 105/125 CPC Port Upgrade Kit (228884) You own the Powermax 105 or 125 unit and would like to run a CNC machine with it – here is your upgrade kit. This is a field installation kit that includes instructions. This item is non-returnable once the static seal has been broken. Includes • CPC...$268.38
  Hypertherm Powermax 105/125 Upgrade CPC Port (228884)  quantity
  Add to cart
• 

  Hypertherm Powermax 45 XP CPC Port Upgrade Kit (428653)

  Hypertherm Powermax 45 XP CPC port with selectable voltage ratio, upgrade kit #428653 The Hypertherm  Powermax 45 XP  CPC port upgrade kit for the base Powermax 45 XP enables you to run a CNC machine. Kit includes a CPC port and voltage divider board. NOTE: This kit will not work with previous model Powermax 45 units, and...$231.20Read more
• 

  Hypertherm Powermax 85 Cutting Consumable Kit (851470)

  $481.40
  Hypertherm Powermax 85 Cutting Consumable Kit (851470) quantity
  Add to cart
• 

  Hypertherm Powermax Mounting Sleeve Kit (228735)

   $82.28
  Hypertherm Powermax Mounting Sleeve Kit (228735) quantity
  Add to cart
• 

  Hypertherm Replacement Filter Clear Bowl (428352)

  Hypertherm 428352 Kit, PMX65/85/105/125 (Sync) Filter Clear Bowl$153.68Read more
• 

  Hypertherm Replacement Filter Element Kit (428378)

  Hypertherm 428378 Kit, PMX30 Air/PMX45 Xp Inline Filter Element$39.78
  Hypertherm Replacement Filter Element Kit (428378) quantity
  Add to cart
• 

  Hypertherm Torch Body T60/80 (128640)

  Quantity: 1 Per Pack Hypertherm T60/80 Machine Torch Main Body Replacement$539.40
  Hypertherm Torch Body T60/80 (128640) quantity
  Add to cart
• 

  Hypertherm Wire Harness Kit Pmax EDGE (228169)

  Hypertherm 228169 Wire Harness Kit, PowermaxEDGE Machine Interface with Voltage-Divider$218.95Read more
• 

  M-60R Air Filter with Regulator 1/2 NPT

  M-60R Compressed Air Filter with Regulator 1/2 NPT Sub-Micronic Compressed Air Filter True-Diaphragm Regulato Pressure Gauge with Glass Lens Shut-off Valve Port Size: 1/2 NPT Nominal Airflow: 100 CFM Nominal Filtration Rating: .01 Micron Outlet Pressure Range: 2-125 PSI Maximum Pressure: 125 PSI Temperature Range: 32-120F$273.99
  M-60R Air Filter with Regulator 1/2 NPT quantity
  Add to cart
• 

  MP-2303 Replacement Motor

  Quantity: 1 Per Pack NEMA 23 High Torque Stepper Motor, Holding Torque ,454 oz-in, XLR connector.$243.60
  MP-2303 Replacement Motor quantity
  Add to cart
• 

  OxyFuel Ignitor Ceramic Ignition Plug

  Quantity: 1 Per Pack$19.95
  OxyFuel Ignitor Ceramic Ignition Plug quantity
  Add to cart
• Sale

  P415-116-15B Tregaskiss Style MIG Torch Liner

  Quantity 1 Per Pack Replacement liners for Tregaskiss style torches. Fits 200-500A torch range One liner per order Liner length is 15′ (4.9m) Manufactured by Parker Torchology to fit OEM specifications P415-116-15B – 1/16″ (1.6 mm)$14.25Original price was: $14.25.$12.85Current price is: $12.85.
  P415-116-15B Tregaskiss Style MIG Torch Liner quantity
  Add to cart
• Sale

  P415-35-15B Tregaskiss Style MIG Torch Liner

  Quantity: 1 Per Pack Parker Torchology – Tregaskiss Style Torch Liners Fits 200-500A torch range One liner per order Liner length is 15′ (4.9m) Manufactured by Parker Torchology to fit OEM specifications Available Liners and Part Numbers P415-35-15B   – 0.035-0.045″ (0.9-1.2 mm)$14.25Original price was: $14.25.$12.85Current price is: $12.85.
  P415-35-15B Tregaskiss Style MIG Torch Liner quantity
  Add to cart
• Sale

  PA44215 Bernard 44 Style MIG Torch Liners

  Quantity 1 Per Pack Replacement inner conduit liner for the BND (Bernard) series guns. Steel, for mild steel, stainless and flux cored wires. Manufactured to Bernard / Tregaskiss 44 specifications. Fits Parker BN 400E/BN’Q’ 400A guns Sold as one liner per order Manufactured by Parker Torchology PA44215 – Up to 1/16″ Wire Diameter, 15 ft. Length$14.25Original price was: $14.25.$12.85Current price is: $12.85.
  PA44215 Bernard 44 Style MIG Torch Liners quantity
  Add to cart
• 

  PRO-TEK M723 Replacement Filter

  Quantity: 1 Per Package Replacement element for Motor Guard M-26, M-30, M-60, M-60R submicronic filters.$30.00
  PRO-TEK M723 Replacement Filter quantity
  Add to cart
• 

  Proxy Replacement Wire (15 Meter)

  Quantity: 1 Per Pack 50 Ft Proxy Wire Singe Ended Cable, Straight M8. 3 Pin Connector.$77.65
  Proxy Replacement Wire (15 Meter) quantity
  Add to cart
• 

  Proxy Replacement Wire (2 Meter)

  Quantity: 1 Per Pack Proxy Wire, 2 Meter, Cordset, Single Ended, 3 Pin, M8x1 Female End.$25.89
  Proxy Replacement Wire (2 Meter) quantity
  Add to cart
• 

  SGB20-3 Black 3 Roller Bearing (20 Series Rails)

  Quantity: 1 Per Pack The SGB slider is made of 6061T5 aluminum alloy and bearing steel rollers. It can reduce friction, operate efficiently with low noise, and run smoothly. It is designed for self-alignment, making it convenient for customers to adjust the clearance. Any slide rail and slider can be interchangeable. With dust-proof strips at...$49.00
  SGB20-3 Black 3 Roller Bearing (20 Series Rails) quantity
  Add to cart
• 

  SW129-ND Replacement Limit Switch 15A

  Quantity: 1 Per Pack MINIATURE SWITCH SW129-ND Limit Switch 15A Omron$10.76
  SW129-ND Replacement Limit Switch 15A quantity
  Add to cart
• 

  Thermal Dynamics 21-1002 XT-300 Torch Head

  Quantity 1 Per Package 21-1002 Speed Lok XT Torch Head$1,850.79
  Thermal Dynamics 21-1002 XT-300 Torch Head quantity
  Add to cart
• 

  Thermal Dynamics 35-1002 XT-301 Torch Head

  Quanity 1 Per Pack Thermal Dynamics 35-1002 XT-301 Torch Head$1,619.90
  Thermal Dynamics 35-1002 XT-301 Torch Head quantity
  Add to cart
• 

  Thermal Dynamics Coolant Filter (9-7321)

  9-7321, ESAB, FILTER COOLANT 100 MIRON, 6GPM$71.57
  Thermal Dynamics Coolant Filter (9-7321) quantity
  Add to cart
• Sale

  Thermal Dynamics Filter Assembly Replacement (9-0116)

  Quantity 1 Per Pack Thermal Dynamics Filter Assembly Replacement Element Manufacturer ‎Thermal Dynamics Brand ‎Thermal Dynamics Product Dimensions ‎20.32 x 5.08 x 5.08 cm; 317.51 g Item model number ‎9-0116 Manufacturer part number ‎9-0116 Item Weight ‎318 g  $155.00Original price was: $155.00.$124.00Current price is: $124.00.
  Thermal Dynamics Filter Assembly Replacement (9-0116) quantity
  Add to cart
• 

  Thermal Dynamics Solenoid Valve Assembly (9-9447)

  Thermal Dynamics® Solenoid Valve Assembly Kit For SL100 Features : Solenoid Valve Assembly Kit SL100 Product Attributes : Torch/Machine Model : SL100 Part Type : Solenoid Valve$185.89
  Thermal Dynamics Solenoid Valve Assembly (9-9447) quantity
  Add to cart
• 

  Thermal Dynamics Torch Head (9-8220)

  Thermal Dynamics replacement 180 deg. Torch head for SL60 and SL100 Plasma torch.$568.78
  Thermal Dynamics Torch Head (9-8220) quantity
  Add to cart