Kjellberg Q Series"Custom Fabricated CNC Plasma Cutting Systems To Meet Your Everyday Needs"
Available April 2023! Q4500
The Q 4500 plasma cutting system is the most powerful system in the Q-Series. It combines precise plasma cutting and marking at the best level with a maximum of 450 A cutting current. It enables the costumer to make precise plasma cuts up to 120 mm. High cutting speeds reduce costs and increase efficiency. This generation of plasma cutting systems is the result of intensive Kjellberg research and development in Kjellberg’s 100-year history. The new, digitised Q plasma system series sets forward-looking standards in quality and connectivity.
The specially developed browser-based operator interface Q-Desk provides real-time process data and information of all plant components on any standard device and location-independent. The user benefits from extensive information enabling him to plan and execute a variety of maintenance tasks as guided by the system.
|Power source||Q 4500|
|Mains voltage||380 – 400 V, 50/60 Hz
415 – 440 V, 50/60 Hz
440 – 480 V, 50/60 Hz
|Cutting current (at 100 % duty cycle)||20 – 450 A|
|Marking current (at 100 % duty cycle)||5 – 50 A|
|Cutting range mild steel||0.5 – 120 mm (piercing up to 50 mm)|
|Dimensions (L x W x H)||1150 x 695 x 1460 mm|
web-based, platform independent
Q-Mark/Q-Notch Excellent marking and notching quality
Contour Cut Exact contours and holes in mild steel with a diameter to material thickness ratio of 1:1 (Diameter:material thickness)
Contour Cut Speed Contour cutting in mild steel with similar quality and up to 50% higher speed
Silent Cut Cutting of mild steel with reduced sound pressure level
HiFinox Plasma cutting of stainless steel and aluminium from 1 to 6 mm with significantly less dross
Ar/H2 Mix Excellent cutting results thanks to active mixing of single gases for stainless steel and aluminium starting from 6 mm
N2 Plasma Cutting Plasma cutting of stainless steel and aluminium up to 60 mm
ProPierce Technology to enhance piercing capacity
Plasma Cutting 4.0
The new, pioneering Q-Series from Kjellberg combines precision plasma cutting at an exceptional level with the complex requirements of digitized production.
Thanks to the modular design, the machine performance of the Q 3000 plus can later be upgraded and, thus, adapted to the your requirements. The specially developed browser-based operator interface Q-Desk provides real-time process data and information of all plant components on any standard device and location-independent. The user benefits from extensive information enabling them to plan and execute a variety of maintenance tasks as guided by the system.
This generation of plasma cutting systems is the result of intensive research and development work by Kjellberg and a landmark in the 60 years of Kjellberg’s plasma history. The new digital plasma series Q sets pioneering standards regarding quality and connectivity.
- Complete new development with more than 60 years of Kjellberg know-how
- Inverter power source – digitally controlled, fully electronic process flow
- Modular design – subsequent upgrading of system perfromance possible
- Best cutting and marking quality – new Q-Mark and Q-Hole technologies
- Optimized processes – proven Contour Cut, Contour Cut Speed and Silent Cut cutting technologies
- Low cost per cutting foot – improved cutting speed, longer lifetime of consumables
Ready for Smart Factories
- Visualization of machine, process and consumption information
- Preventive inspection and maintenance analysis
- Interactive database, training and service updates